این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۳، شماره ۳، صفحات ۸۰۵-۸۱۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Substitute model and CFD Investigations of a Coalescer in a Three-Phase Crude Oil Gravity Separator
چکیده انگلیسی مقاله The flow structure in a three-phase gas-oil-water separator and its performance was the main objective of the presented investigations, for which the Euler-Euler multiphase model to simulate the flow was used. The main assumption of the model is that secondary phases, consisting of oil and water droplets, are mono-dispersed with no coalescence and breakup. The considered separator is a part of the installation operated by a drilling company. In general, the investigation of separation process is very computationally expensive and time-consuming, therefore it is desirable to search for some simplifications in order to be able to carry out engineering analysis of the processes taking place in a separator. Hence, the three-dimensional coalescer was investigated as a porous element in order to find pressure losses dependence on flow velocity, which was required to simulate the existence of coalescers and baffles. As the next step, a transient Eulerian multiphase simulations were carried out for gas-oil-water mixture in a real horizontal gravity separator for two- and three-dimensional case. Required data for calculations was derived from real exploration well. In the two-dimensional case, the worked out dependence of the pressure drop with respect to velocity was used to model the flow through the porous coalescers. In three-dimensional case, the coalescers and baffles were modelled without any simplifications. It was found that general trends can be predicted despite the simplification of the geometrical model in which coalescer and baffle geometries have been replaced by a porous medium. The calculations confirmed that the complexity of geometry requiring time-consuming calculations can be usually replaced by introducing simplifications allowing for engineering analysis of separator operation that is acceptable by the industry, because the basic parameters regarding the separation process can be determined.
کلیدواژه‌های انگلیسی مقاله Oil Separators, Multiphase calculations, Coalescers
نویسندگان مقاله Z. Krzemianowski |
Institute of Fluid-Flow Machinery Polish Academy of Sciences, Fiszera 14, Gdańsk, 80-231, Poland

M. Lackowski |
Institute of Fluid-Flow Machinery Polish Academy of Sciences, Fiszera 14, Gdańsk, 80-231, Poland

T. Ochrymiuk |
Institute of Fluid-Flow Machinery Polish Academy of Sciences, Fiszera 14, Gdańsk, 80-231, Poland

P. Flaszyński |
Institute of Fluid-Flow Machinery Polish Academy of Sciences, Fiszera 14, Gdańsk, 80-231, Poland

نشانی اینترنتی https://www.jafmonline.net/article_970_7be0511e995e547d2a1e8ae9adef4b0f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات