این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۳، شماره ۲، صفحات ۴۱۳-۴۲۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A Comparative CFD Study on Laminar and Turbulent Flow Fields in Dual-Rushton Turbine Stirred Vessels
چکیده انگلیسی مقاله A computational fluid dynamics(CFD) simulation was carried out to study on flow field characteristics in dual-Rusthton turbine stirred vessels in laminar and turbulent regimes. Model validation was conducted using experimental data in the literature. The simulation results show that flow pattern and dimensionless velocity distribution vary with Reynolds number in laminar regime, while these parameters remain almost unchanged for different Reynolds numbers in turbulent regime. For vessels with a certain geometrical configuration, flow pattern, dimensionless velocity distribution and impeller power number depend mainly on Reynolds number, and are little affected by working medium and enlargement scale. By changing impeller spacing and off-bottom clearance of lower impeller, it is obtained the parallel, merging and diverging flow patterns in turbulent regime, and the changing processes of flow patterns in laminar regime for the three configurations. Total power number has the order of parallel>diverging>merging for the three configurations at the same Reynolds number. With increasing of Reynolds number, the power number of merging configuration shows the largest drop, followed by diverging configuration, and the lowest drop for parallel configuration in laminar regime, while power number rises slightly for the three configurations in turbulent regime.
کلیدواژه‌های انگلیسی مقاله Stirred vessel, Dual, Impeller, Laminar and turbulent flow, Numerical simulation, Flow pattern
نویسندگان مقاله L. C. Li |
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China

N. Chen |
Yinhe Constructional and Chemicals Group Co., Ltd. Anxian, Sichuan 622656, China

K. F. Xiang |
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China

B. P. Xiang |
Key Laboratory of Testing Technology for Manufacturing Process of Ministry of Education, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China

نشانی اینترنتی https://www.jafmonline.net/article_934_b98710aca74f17725220845f01653a28.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات