این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۲، شماره ۶، صفحات ۲۰۰۳-۲۰۱۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Investigation on the Effects of Internal Flow Structure on Ejector Performance
چکیده انگلیسی مقاله
Recent work on ejector performance enhancement indicates that more information on ejector internal flow structure is needed to have a clearer picture of factors and conditions affecting operation and performance of these devices. This paper relies on experimental studies and CFD simulations to identify flow structures occurring under typical ejector refrigeration conditions and primary nozzle geometry and position. Effects on parameter distributions and the resulting operation of the device are given particular attention. The CFD model used for this purpose was validated by using in-house data, generated from an experimental prototype and over a wide range of conditions. The experiments for the selected condition were predicted very satisfactorily by numerical model. The study then focused on the role of the primary nozzle geometry and the distance of the nozzle from the beginning of the mixing chamber (NXP), in locally shaping the flow structure and the related consequences on ejector operation. Simulations on NXP for given operating conditions have shown that an optimum value was always found, and slightly varied the operating conditions within the range considered. Primary nozzle shape changes in terms of outlet diameters for given upstream conditions directly affected the expansion level of the flow. The simulations showed that an optimum range of nozzle exit diameters could be found, for which ejector performance was highest. Moreover, under these conditions it was observed that pressure fluctuations inside the ejector were reduced.
کلیدواژههای انگلیسی مقاله
Ejector performance, Ejector configuration, CFD simulation, Performance improvement
نویسندگان مقاله
M. Falsafioon |
Canmet ENERGY, Natural Resources Canada, 1615 Lionel-Boulet Blvd., Varennes, Qubec, J3X 1S6, Canada
Z. Aidoun |
Canmet ENERGY, Natural Resources Canada, Varennes, Qc, J3X1S6, Canada
K. Ameur |
Canmet ENERGY, Natural Resources Canada, Varennes, Qc, J3X1S6, Canada
نشانی اینترنتی
https://www.jafmonline.net/article_894_a898cda44560fffa1205c6df9268aaed.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات