این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۲، شماره ۵، صفحات ۱۴۸۷-۱۴۹۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Empirical and Numerical Analysis of Aerodynamic Drag on a Typical SUV Car Model at Different Locations of Vortex Generator
چکیده انگلیسی مقاله
The aerodynamic characteristics are concerned with the fuel consumption rate and the stability of a high speed vehicle. The current research aims at studying the aerodynamic behavior of a typical SUV vehicle model mounted with the vortex generator (VG) at various linear positions with reference to its rear roof edge. The flow field around the vehicle model was observed at different wind speed conditions. It had been determined that at the instance of lower wind speed, the VG had minimal effects of aerodynamic drag on the vehicle body. However, at the instance of higher wind speed conditions the magnitude of the drag force decreased significantly. Vehicles move at higher speeds in the highways, location of the VG varied towards the upstream of the vehicle due to early flow separation. Therefore test were conducted at different wind speeds and locations of VG. The numerical simulation conduced in this study provides flow characteristics around the vehicle model for different wind speeds. The realizable k−ε model was used to simulate and validate the empirical results in an effective manner. By using experimental data, the drag was reduced by 9.04 % at the optimized VG location. The results revealed that the induced aerodynamic drag would determine the best car shape. This paper provides a better understanding of VG positioning for enhanced flow separation control.
کلیدواژههای انگلیسی مقاله
Flow separation control, Vortex generator, VG location, Drag reduction, Boundary layer thickness
نویسندگان مقاله
P. N. Selvaraju |
Automobile Engineering, Rajalakshmi Engineering College, Chennai, Tamilnadu, 602105, India
K. M. Parammasivam |
Aerospace Engineering, MIT Campus Anna University, Chennai, Tamilnadu, 600044, India
نشانی اینترنتی
https://www.jafmonline.net/article_853_ab3e20482727757d8ce8d6befad11383.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات