این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۲، شماره ۴، صفحات ۱۱۰۳-۱۱۱۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Detection of Cavitation through Acoustic Generation in Centrifugal Pump Impeller
چکیده انگلیسی مقاله
The most common device which transport fluid in industries, agriculture as well as domestic water supply is the centrifugal pump. Based on fluid transfer conditions, several let-downs are occur in the centrifugal pump, cavitation is one among them. The flow pattern at the eye of impeller deviates from the ideal case with the occurrence of cavitation. Due to cavitation, vibration occurs on blades that generates noise in pump. In this study, the acoustics generated in centrifugal pump impeller due to cavitation is detected with the sound pressure by using 3-Dimensional, steady and unsteady state computational fluid dynamics (CFD) analysis of an industrial centrifugal pump impeller. Harmonic force analysis with blade row model helps in finding the sound pressure. The acoustics generated with unsteady-state is compared with cavitation at steady-state CFD analysis. The Reynolds averaged Navier-Stokes equations model as well as Shear Stress Transport (SST) turbulence model are used for the CFD simulation. The results show that the sound pressure calculated increases with the increase in cavitation (i.e. formation of vapour bubbles and sudden drop in head) which shows that high noises are generated by centrifugal pump impeller at lower net positive suction head (NPSH) at a particular discharge.
کلیدواژههای انگلیسی مقاله
Centrifugal pump impeller, Cavitation, Net positive suction head (NPSH), Acoustics, Sound pressure, Vapour volume fraction
نویسندگان مقاله
A. K. Jaiswal |
Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj-211004, India
A. U. Rehman |
Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj-211004, India
A. R. Paul |
Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj-211004, India
A. Jain |
Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj-211004, India
نشانی اینترنتی
https://www.jafmonline.net/article_821_a2bbe77ea8f1f9effb86994633d9613f.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات