این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۲، شماره ۳، صفحات ۶۸۹-۶۹۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Reflux Hole on the Transient Flow Characteristics of the Self-Priming Sewage Centrifugal Pump
چکیده انگلیسی مقاله The reflux hole has a large effect on the performance of self-priming centrifugal pumps. In order to study the effects of the reflux hole on the performance and transient flow characteristics of the self-priming centrifugal pump, four different areas of the reflux hole inside an external mixed self-priming pump were proposed. The 3D transient flow was numerically simulated under different operating conditions for the investigated pump. The differential pressure, reflux quantity and transient flow characteristics near the reflux hole were analysed, and then the effects of the reflux hole area on the pressure fluctuation characteristics and performance of the pump were further researched. The results show that the differential pressure and reflux quantity is zero around the best-efficiency point. The vorticity magnitude near the exit of the reflux hole is significant, and the unsymmetrical flow structures represent periodic motion over time in the cross-section. The pressure fluctuation intensities of monitoring points P2-P5 upstream of the reflux hole were generally larger than others and decreased with a decrease in reflux hole area. With a decrease of the reflux hole area, the performance of the pump improved to some extent.
کلیدواژه‌های انگلیسی مقاله Centrifugal pump, Reflux hole, Transient flow characteristics, Pressure fluctuation
نویسندگان مقاله P. Zhou |
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China

J. Mou |
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China

J. Mou |
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China

S. Zheng |
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China

S. Zheng |
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou, Zhejiang, 310014, China

X. Chen |
Faculty of Mechanical Engineering and Automation, Zhejiang Sci-Tech University 1, Hangzhou, Zhejiang 310018, China

نشانی اینترنتی https://www.jafmonline.net/article_786_20bb85dcc00886223a9bb1438559be47.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات