این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۲، شماره ۳، صفحات ۸۳۱-۸۴۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Study on the Effect of Temperature on Droplet Formation inside the Microfluidic Chip
چکیده انگلیسی مقاله
The flow-focusing method is a technology for microfluidic droplet control, and the temperature can effect on the droplet formation. In this study, the droplet formation in the flow-focusing method during the squeezing of dispersed phase by the continuous phase is simulated using CLSVOF, with the consideration of the effects of temperature on droplet size, shape and frequency. The simulation results are consistent with experimental data. The simulated results demonstrate that the droplet size increases with the increase of inlet phase temperature, while the shape regularity and forming frequency decrease, the maximum increase of droplet size is 16%, the biggest drop of droplets number is 29%, and the biggest drop of the roughness parameter is 5%. When the inlet temperatures of the continuous phase are not equal, dripping and jetting are observed in the flow regime of droplet dispersed phase. The mechanism of the temperature influence on droplet formation and the detailed process of droplet formation under different flow regimes are discussed. At the same time, the radial size of droplet breakup point under different flow regimes is compared. The simulation results provide insights in better selection of the control parameters for droplet formation technology.
کلیدواژههای انگلیسی مقاله
Droplet formation, Numerical simulation, Flow focusing, Temperature, CLSVOF
نویسندگان مقاله
F. Jiang |
School of Mechanical and Electrical Engineering, Guangzhou University, China
J. Song |
Joining Technology Group, Singapore Institute of Manufacturing Technology, Singapore
J. Song |
Joining Technology Group, Singapore Institute of Manufacturing Technology, Singapore
A. Q. Lin |
College of Power and Energy Engineering, Harbin Engineering University, Harbin, 150001, Heilongjiang Province, China
نشانی اینترنتی
https://www.jafmonline.net/article_797_ff062dae7758636bca70b589f8c161c1.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات