این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۲، شماره ۱، صفحات ۲۵-۳۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Flow Simulation and Cavitation Prediction in a Centrifugal Pump using an SST-SAS Turbulence Model
چکیده انگلیسی مقاله The paper handles the subject of the modelling and simulation of the flow inside a centrifugal pump through non-cavitating and cavitating conditions. Operating under cavitation state is so perilous to a pump and can considerably reduce its lifetime service. Hence, to provide highly reliable pumps, it is essential to comprehend the inner flow of pumps. The investigated centrifugal pump comprises five backward curved-bladed impeller running at 900 rpm. The modelling process started with an unsteady numerical analysis under non-cavitating conditions to validate the numerical model and the solver comparing with the available testing data. Due to high Reynolds numbers, turbulence effects have been taken into account by unsteady RANS methods using an SST-SAS turbulence model. The obtained pump performances were numerically compared with the experimental ones, and the outcome shows an acceptable agreement between both. The temporal distribution of the internal flow parameters such as pressure and velocity was then studied. Furthermore, basic investigations of cavitating flow around 3D NACA66-MOD profile using a recently developed and validate cavitation model was established. The verification of the numerical simulation validity was based on comparing calculated and experimental results and presented good agreement. Finally, a 3D simulation of the inception of the cavitating pocket inside the centrifugal pump is performed to analyze the impact of the cavitation in the decrease of the head and efficiency.
کلیدواژه‌های انگلیسی مقاله Unsteady simulation, scale, adaptive simulation, NACA66, Centrifugal pump, Cavitation
نویسندگان مقاله M. Ennouri |
Laboratory of Hydraulic and Environment Modeling, National Engineering School of Tunis, University of Tunis El Manar, Tunis, 1002, Tunisia

H. Kanfoudi |
Laboratory of Hydraulic and Environment Modeling, National Engineering School of Tunis, University of Tunis El Manar, Tunis, 1002, Tunisia

A. Bel Hadj Taher |
Laboratory of Hydraulic and Environmental Modeling, National Engineering School of Tunis, University of Tunis EL MANAR, 1002 Tunis, Tunisia

R. Zgolli |
Laboratory of Hydraulic and Environment Modeling, National Engineering School of Tunis, University of Tunis El Manar, Tunis, 1002, Tunisia

نشانی اینترنتی https://www.jafmonline.net/article_738_7cc27bf42ea90951b1ddb6c4b4f788ed.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات