این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۲، شماره ۱، صفحات ۵۱-۵۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Study of Pulsatile Flow in Common Carotid Artery with Different Stenosis' Shapes within Various Wall Conditions
چکیده انگلیسی مقاله Recently, due to the development of CFD techniques, many attempts have been made to simulate the initiation and progression of atherosclerosis. In recent works, various curves have been suggested to model the stenosis shape. However, little effort has been made to study the importance of the stenosis shape on the flow behavior. In this study, four types of stenosis with asteroid, Gaussian, semi-circle, and sinusoidal shapes were simulated in order to study the effect of the stenosis shape on flow behavior and diagnosis parameters. Shear stress and flow behavior were investigated in the common carotid artery with stenosis severities of 30%, 40%, and 50%. Flow was assumed to be unsteady and the inlet to be a pulsatile flow. Two cases of Newtonian and non-Newtonian fluids were simulated. The no-slip and permeable boundary conditions were imposed on the outer walls. To examine the effect of the location of stenosis, modeling was conducted at various locations. The results showed that the maximum shear stress occurs in the Gaussian stenosis at the opening of the stenosis. Semi-circle, sinus, and asteroid shapes had the next largest shear stress values. Additionally, the location of stenosis had a negligible effect on the maximum shear stress. However, flow resistance increased with increasing the stenosis’s distance from the beginning of the artery. This study indicates that stenosis shape highly affects the flow characteristics, and stenosis severity is not the only parameter that is important. Hence, the stenosis shape should be considered when simulating atherosclerosis.
کلیدواژه‌های انگلیسی مقاله Pulsatile flow, Common carotid artery, Permeable walls, Stenosis, Newtonian fluid
نویسندگان مقاله P. Bayat |
Department of Mechanical Engineering, York University, Toronto, M3J1P3, Canada

M. R. Tavakoli |
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, 84156-83111, Iran

نشانی اینترنتی https://www.jafmonline.net/article_746_a3991d5582cc70e9e93b0ccf9715476c.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات