این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۱، شماره ۱، صفحات ۲۵۷-۲۷۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Optimization and Biodiesel Production from Prosopis Julifera Oil with High Free Fatty Acids
چکیده انگلیسی مقاله
Prosopis julifera is a non-edible feedstock found in the arid and semi-arid regions was used for the production of biodiesel. Solvent extraction technique was used for oil extraction from Prosopis julifera .The present work mainly concentrates on the three step process of biodiesel production from Prosopis julifera oil .The acid value of Prosopis julifera oil was reduced below 1% using acid catalyst 1% v/v H2SO4 followed by esterification process using alkaline catalyst (KOH).Transesterification reaction is found to be affected by the reaction variables namely methanol to oil molar ratio, amount of catalyst used, reaction time and reaction temperature. Gas chromatography was used to analyse the Fatty acid methyl esters. The methyl ester obtained from the previous step was refined to produce biodiesel. The fuel properties of Prosopis julifera methyl ester (PJME) such as viscosity, cetane number, flash point, acid value, etc were determined and compared according to the ASTM standards. The optimum reaction conditions of Methanol/oil molar ratio of 9:1v/v, reaction temperature of 550C, reaction time of 2 hrs and 0.75% w/v of KOH usage were determined. Response surface Methodology (RSM) technique was used to optimize the maximum yield of Prosopis julifera methyl ester.
کلیدواژههای انگلیسی مقاله
Prosopis julifera, Acid Esterification, Transesterification, Process optimization
نویسندگان مقاله
M. Rajeshwaran |
Department of Mechanical Engineering, Mohamed Sathak Engineering College, Ramanathapuram – 623 806, Tamil Nadu, India
P. Ganeshan |
Department of Mechanical Engineering, VSB Engineering College, Karur - 639 111, Tamil Nadu, India
K. Raja |
Department of Mechanical Engineering, Anna University, University college of Engineering, Dindigul - 624005, Tamil Nadu, India
نشانی اینترنتی
https://www.jafmonline.net/article_583_aa3800fe489d0f7d58e1daf29992a7ef.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات