این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۰، شماره ۶، صفحات ۱۶۰۵-۱۶۱۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Studies on Thrust Augmentation in High Area Ratio Rocket Nozzles by Secondary Injection
چکیده انگلیسی مقاله Single stage to orbit propulsion devices are being developed as part of low cost access to space endeavors. Sea level operation of high area ratio rocket nozzle used in rocket engines leads to an overexpanded flow condition resulting in high side loads. Secondary injection of propellants in high area ratio nozzle is an attractive option to overcome the inefficiency of operation of such nozzles in sea level conditions in addition to the augmentation of thrust. A numerical study on thrust augmentation in high area ratio nozzle by secondary injection of propellants is presented here. The turbulent compressible reacting flow in rocket nozzle with auxiliary injection is simulated using conservation equations for chemical species based on finite rate chemistry model and compressible Navier-Stokes equations with AUSM+-up upwind scheme based unstuctured finite volume solver. An optimized eight step, six species reduced H2-O2finite chemistry reaction model is used to model the supersonic combustion. The indigenously developed solver has an efficient rescaling algorithm to alleviate the effect of stiffness in conventional explicit algorithm for simultaneous solution of reacting flow. The code is validated using the wall pressure and hydrogen concentration values reported for the similar high area ratio rocket nozzle. Accurate prediction of nozzle performance is possible with present turbulent reacting flow simulation as it take care of all losses in nozzle flow. Extensive computations have been performed for the performance estimation of high area ratio rocket nozzle for various prospective auxiliary injection options.
کلیدواژه‌های انگلیسی مقاله Rocket nozzles, Thrust augmentation, Turbulent reacting flows, AUSM+, up scheme, Finite volume method
نویسندگان مقاله S. Shyji |
Department of Mechanical Engineering; SCT College of Engineering, Thiruvananthapuram, Kerala-695018, India

M. Deepu |
Department of Aerospace Engineering; Indian Institute of Space Sci. &Tech., Thiruvananthapuram, Kerala-695547, India

N. A. Kumar |
Department of Mechanical Engineering; College of Engineering, Thiruvananthapuram, Kerala-695016, India

T. Jayachandran |
Propulsion & Space Ordnance Entity, Vikram Sarabhai Space Center, Thiruvananthapuram- 695022, India

نشانی اینترنتی https://www.jafmonline.net/article_547_df238c645f49ac0227cc9c109bb3df47.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات