این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۰، شماره ۲، صفحات ۵۱۹-۵۲۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Prediction of Pressure Drop in Vertical Pneumatic Conveyors
چکیده انگلیسی مقاله This paper presents a steady state one-dimensional two-fluid model for gas-solid two-phase flow in a vertical riser. The model is solved using conservative variable approach for the gas phase, and fourth order Runge-Kutta method is used for the solid phase. The model predictions for pressure drop are compared with available experimental data and with Eulerian-Lagrangian predictions, and a good agreement is obtained. The results indicate that the pressure drop increases as the solid mass flow rate, particle size, and particles density increase. In addition, the model predictions for minimum pressure drop velocity are compared with experimental data from literature and the mean percentage error. MPE for minimum pressure drop velocity is -9.89%. It is found that the minimum pressure drop velocity increases as the solid mass flow, particle size and particle density increase, and decreases as the system total pressure increases.
کلیدواژه‌های انگلیسی مقاله Gas, solid, Pneumatic conveying, Two, fluid model, Pressure drop
نویسندگان مقاله S. M. El-Behery |
Mechanical Power Engineering Department, Faculty of Engineering, Menoufyia University, Shebin El-Kom Egypt

A. A. El-Haroun |
Mechanical Power Engineering Department, Faculty of Engineering, Menoufyia University, Shebin El-Kom Egypt

M. R. Abuhegazy |
Mechanical Power Engineering Department, Faculty of Engineering, Menoufyia University, Shebin El-Kom Egypt

نشانی اینترنتی https://www.jafmonline.net/article_453_efde27a792aeb68c538053c0d92e6696.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات