این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۰، شماره ۲، صفحات ۶۲۵-۶۳۷

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Coupled Analysis of Unsteady Aerodynamics and Vehicle Motion of a Passenger Car in Crosswind Condition
چکیده انگلیسی مقاله High-speed passenger car requires a lighter weight for improving power performance and reducing fuel consumption; a car with higher-speed and lighter weight will lead to the passenger car more sensitive to the crosswind, which will affect the stability and drivability of the passenger car. This study employs the fully-coupled method to investigate a passenger car subjected “1-cos” crosswind with consideration of the vehicle motion. Large eddy simulation (LES) and dynamic mesh is adopted to investigate the unsteady aerodynamic, and the vehicle is treated as a three-freedom-system and driver’s control is considered to investigate the vehicle dynamic. The one-way simulation and quasi-steady simulation are also conducted to compare with the fully-coupled simulation. The results of the three simulation methods show large difference. The peak value of the lateral displacement in fully-coupled simulation is the smallest between the three simulation approaches. While the change of aerodynamic loads and vehicle motion in fully-coupled simulation is more complicated than in one-way and quasi-steady simulation. These results clearly indicate the significance of including of the unsteady aerodynamic loads in passenger car moving analysis.
کلیدواژه‌های انگلیسی مقاله Large, Unsteady aerodynamic, eddy simulation, Vehicle motion, Fully, coupled simulation, One, way simulation, Quasi, steady simulation

نویسندگان مقاله T. M. Huang |
State Key Laboratory of advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, P. R. China

Z. Q. Gu |
State Key Laboratory of advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, P. R. China

C. J. Feng |
State Key Laboratory of advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, P. R. China


نشانی اینترنتی https://www.jafmonline.net/article_462_e7b62bd3635fb97adf3d93604e1cc584.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات