این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۰، شماره ۱، صفحات ۲۱-۳۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental and Numerical Investigation of a Longfin Inshore Squid’s Flow Characteristics
چکیده انگلیسی مقاله In the present study, a three-dimensional numerical squid model was generated from a computed tomography images of a longfin inshore squid to investigate fluid flow characteristics around the squid. The three-dimensional squid model obtained from a 3D-printer was utilized in digital particle image velocimetry (DPIV) measurements to acquire velocity contours in the region of interest. Once the three-dimensional numerical squid model was validated with DPIV results, drag force and coefficient, required jet velocity to reach desired swimming velocity for the squid and propulsion efficiencies were calculated for different nozzle diameters. Besides, velocity and pressure contour plots showed the variation of velocity over the squid body and flow separation zone near the head of the squid model, respectively. The study revealed that viscous drag was nearly two times larger than the pressure drag for the squid’s Reynolds numbers of 442500, 949900 and 1510400. It was also found that the propulsion efficiency increases by 20% when the nozzle diameter of a squid was enlarged from 1 cm to 2 cm.
کلیدواژه‌های انگلیسی مقاله Computed tomography (CT), CFD, Drag, Propulsive efficiency, Longfin inshore squid
نویسندگان مقاله A. Bahadir Olcay |
Yeditepe University, Mechanical Engineering Department, Atasehir, Istanbul 34755, Turkey

M. Tabatabaei Malazi |
Yildiz Technical University, Faculty of Mechanical Engineering, Besiktas, Istanbul 34349, Turkey

A. Okbaz |
Yildiz Technical University, Faculty of Mechanical Engineering, Besiktas, Istanbul 34349, Turkey

H. Heperkan |
Yildiz Technical University, Faculty of Mechanical Engineering, Besiktas, Istanbul 34349, Turkey

E. Fırat |
Cukurova University, Mechanical Engineering Department, Saricam / Adana 01330, Turkey

V. Ozbolat |
Cukurova University, Mechanical Engineering Department, Saricam / Adana 01330, Turkey

M. Gokhan Gokcen |
Dogus University, Mechanical Engineering Department, Kadikoy 34722 Istanbul, Turkey

B. Sahin |
Cukurova University, Mechanical Engineering Department, Saricam / Adana 01330, Turkey

نشانی اینترنتی https://www.jafmonline.net/article_420_651e20d463a700d9262e7562a1df1950.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات