این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 21 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۰، شماره ۱، صفحات ۲۵۷-۲۶۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Study on the Effect of Single Shallow Circumferential Groove Casing Treatment on the Flow Field and the Stability of a Transonic Compressor
چکیده انگلیسی مقاله
The present research investigates the effect of the location and the width of single shallow circumferential groove casing treatment on the flow field and the stability improvement of NASA Rotor 37 utilizing the help of computational fluid dynamics. At first, steady state simulation of Rotor37 was presented for smooth casing (without groove). Then, forty five various grooved casing were simulated and compared with the smooth casing. The results indicated that narrow grooves had slight effect on the adiabatic efficiency but as the width of the groove was increased, a decline in efficiency was observed. The investigation on the stall margin revealed that narrow grooves next to the leading edge could improve the stall margin by a reduction in the size of vortex breakdown zone. Medium-width grooves displayed an effective role in delaying the separation- produced by shock wave and boundary layer interaction- on the blade suction side near the casing. This type of grooves could improve the stall margin more than narrow grooves when located on the top of separation zone near the blade suction side. Wide grooves had negative effect on the stall margin and caused a significant drop in the efficiency and the total pressure ratio of the compressor.
کلیدواژههای انگلیسی مقاله
Circumferential groove, Transonic compressor, Stall margin, CFD
نویسندگان مقاله
M. Agha Seyed Mirzabozorg |
Department of Aerospace Engineering, Malek Ashtar University of Technology, Isfahan, Iran
M. Bazazzadeh |
Department of Aerospace Engineering, Malek Ashtar University of Technology, Isfahan, Iran
M. Hamzezade |
Department of Aerospace Engineering, Malek Ashtar University of Technology, Isfahan, Iran
نشانی اینترنتی
https://www.jafmonline.net/article_424_088db7a69c74f94681196ce584fd0225.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات