این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۹، شماره ۶، صفحات ۲۹۹۳-۳۰۰۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Effect of Advance Ratio and Blade Planform on the Propeller Performance of a High Altitude Airship
چکیده انگلیسی مقاله
Experimental investigations on the influences of Reynolds number, blade planform and advance ratio on the aerodynamic performance are carried. Different from conventional aircraft propellers, the HAA propellers are characterized by low Reynolds number, large thrust requirement and low advance ratio. At the moment, the theoretical guidance and industrial experience in designing such propellers are still lacked. In the present study, the influence of Reynolds number is firstly studied via tests of a propeller at different rotational speeds. It is found that, for the propeller with airfoil S1223, the influence of Reynolds number is negligible as Re0.7 > 1.2 × 105 ( ). The tests regarding the influences of blade planform and advance ratio on propeller performance are carried in the condition of Re0.7 ≥ 1.5 × 105. The results show that, when advance ratio is below 0.8, the blade with narrow tip is favorable to the propulsive efficiency. Hence, it is suggested that the blade with narrow tip should be adopted by the large thrust and small advance ratio HAA propellers. For HAA propellers with advance ratio greater than 0.8, the propulsive efficiency can be benefitted by increasing the blade tip width. Hence, the blade with wide tip is more suitable in this application.
کلیدواژههای انگلیسی مقاله
High altitude airship propeller, Blade planform, Low Reynolds number, Low advance ratio
نویسندگان مقاله
Z. Liu |
Beijing University of Aeronautics and Astronautics, Beijing, 100191, China
P. Liu |
Beijing University of Aeronautics and Astronautics, Beijing, 100191, China
A. Atia |
Laboratory of Mechanics, University of Laghouat, Laghouat 03000, Algeria
A. Atia |
Laboratory of Mechanics, University of Laghouat, Laghouat 03000, Algeria
نشانی اینترنتی
https://www.jafmonline.net/article_1862_41c82238e825dfe774aeb6c57dfa99f5.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات