این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۹، شماره ۱، صفحات ۴۱۹-۴۳۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Applied Thermal Lattice Boltzmann Model for Fluid Flow of Free Convection in 2-D Enclosure with Localized Two Active Blocks: Heat Transfer Optimization
چکیده انگلیسی مقاله The aim of this paper is to analyze the laminar free convective flow generated by two identical hot blocks in two-dimensional enclosure cooled by the sides in order to optimize the heat transfer. The top wall and the flat surfaces on bottom wall are adiabatic except for the active sources located symmetrically. Each source of a rectangular form is heated at a uniform temperature while the Prandtl number is fixed at 0.71. Thermal Lattice Boltzmann model of D2Q4-D2Q9 is applied to solve the thermal flow problem. Numerical simulations have been conducted to reveal the effects of various parameters; Rayleigh number 103 ≤ Ra ≤ 106, spacing between blocks 0.1 ≤ D ≤ 0.6, block height 0.05 ≤ H ≤ 0.4 and aspect ratio of the enclosure 1 ≤ A ≤ 4 on fluid flow and heat transfer. The computational results by Lattice Boltzmann method have been found to be in good agreement with previous works. The results are presented in the form of isotherms and streamlines plots as well as the variation of the average Nusselt number along horizontal and vertical hot walls. It is found that increasing Rayleigh number and distance between active blocks enhance the heat transfer. The simulations show that the block height and aspect ratio are the most important parameters affecting dynamic and thermal fields and consequently the heat transfer efficiency in the enclosure.
کلیدواژه‌های انگلیسی مقاله D enclosure, free convection, 2, Active blocks, Lattice Boltzmann method, Optimum heat transfer
نویسندگان مقاله T. Naffouti |
Université Tunis El-Manar, Faculté des Sciences de Tunis, Département de Physique, Laboratoire d’Energétique et des Transferts Thermique et Massique, El Manar 2092, Tunis, Tunisia.

J. Zinoubi |
Université Tunis El-Manar, Faculté des Sciences de Tunis, Département de Physique, Laboratoire d’Energétique et des Transferts Thermique et Massique, El Manar 2092, Tunis, Tunisia.

N. A. Che Sidik |
Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia

R. B. Maad |
Université Tunis El-Manar, Faculté des Sciences de Tunis, Département de Physique, Laboratoire d’Energétique et des Transferts Thermique et Massique, El Manar 2092, Tunis, Tunisia.

نشانی اینترنتی https://www.jafmonline.net/article_1615_adce12e23c7d9e654b490833e98e5aea.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات