این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 22 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۷، شماره ۲، صفحات ۱۸۷-۱۹۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Gas and Particle Flow in a Spray Roaster
چکیده انگلیسی مقاله
In the steel industry, waste hydrochloric acid is produced through the process to pickle steel slabs for removal of corrosion. Regenerated hydrochloric acid is obtained by separating the chloride gas from the waste product through spray roasting.This process also produces a by-product in the form of iron oxide which is sold to different industries. The present study is a continuation of a study arising from the need to better understand the dynamics inside the regeneration reactor, which in turn will improve possibilities to optimize the regeneration process, which to date has been manually adjusted by trial and error. In this study the velocity and temperature distribution inside the reactor is numerically modelled together with the droplet motion through the reactor. The main objective is to investigate the influence of a changed spray nozzle position on the flow characteristics of the continuous and dispersed phase, and the relation between temperature and energy efficiency and the regeneration process. Numerical models of the type of flow present in the regeneration reactor are not represented to any major extent in the literature, making the present study relevant to the engineers and researchers active in the steel industry and the application in question.
کلیدواژههای انگلیسی مقاله
Hydrochloric acid regeneration, Two, Particle transport, Phase flow, Energy efficiency, Spray nozzle position
نویسندگان مقاله
S. Johansson |
Division of Fluid and Experimental Mechanics, Lule°a University of Technology, SE-971 87 Lule°a, Sweden
L. G. Westerberg |
Division of Fluid and Experimental Mechanics, Lule°a University of Technology, SE-971 87 Lule°a, Sweden
T. S. Lundstrom |
Division of Fluid and Experimental Mechanics, Lule°a University of Technology, SE-971 87 Lule°a, Sweden
نشانی اینترنتی
https://www.jafmonline.net/article_1435_f6f5d3cf3c022e436a6ac1281f422c22.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات