این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 21 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۷، شماره ۳، صفحات ۶۰۴-۶۱۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical and Experimental Investigation of the Influence of Backpressure on a Confined Impinging Jet for Small Nozzle-to-plate Spacing
چکیده انگلیسی مقاله
In order to further extend understanding of the heat transfer characteristics under an enclosed area, the influence of backpressure on a single impingement jet with small nozzle-to-plate spacing (
H/D
) is studied. Particle image velocimetry (PIV) technique and a commercial fluid dynamics solver (CFD) are respectively employed to investigate the fluid dynamics of the impinging jet, with a Reynolds number (
Re
) of 3462–6125, at a small nozzle-to-plate spacing (
H/D
) of 0.25–1.25. Experimental data are in well agreement with numerical simulation data. The findings indicate that the H/D ratio significantly influences the formation of backpressure in the flow field. The backpressure then influences the boundary layer velocity on the impingement surface, in turn affecting the impingement surface's heat transfer characteristics. In addition, a turning point in the horizontal velocity curve of
H/D
= 0.4 is found for an entire range of jet heights, which is independent of the Reynolds number (
Re
).
کلیدواژههای انگلیسی مقاله
Backpressure, Small nozzle-to-plate distances, Impingement cooling, Flow characteristic, Heat transfer performance
نویسندگان مقاله
K. Zhu |
School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou 213164, China
R. Shen |
School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou 213164, China
T. Sun |
School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou 213164, China
G. Chen |
Institute of Intelligent Flexible Mechatronics, Jiangsu University, Zhenjiang, 212013, China
J. Ding |
School of Mechanical Engineering, Yangzhou University 225009, China
نشانی اینترنتی
https://www.jafmonline.net/article_2368_6e37c6201aa3659c5500426836525fe6.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات