این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Radiation Research، جلد ۱۴، شماره ۴، صفحات ۲۸۷-۲۹۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Use of a 3D printer to create a bolus for patients undergoing tele-radiotherapy
چکیده انگلیسی مقاله Background: This study describes the possibility of implementing three-dimensional printing technology to create a precise construction of a planned bolus, based on computed tomography information stored in the Digital Imaging and Communications in Medicine (DICOM) format file. Materials and Methods: To create the bolus with a 3D printer, we converted data in the DICOM format to the stereolithography (STL) format. In addition, we produced a paraffin bolus that, traditionally, is manually placed directly on the patient. CT scans were acquired for both boluses, and the images were superimposed onto the patient CT scans that were used to design the bolus. The superimposition of images was performed to compare the fit of the bolus printed on a 3D printer to that of the paraffin bolus made in the traditional way. In addition, for both models, the dose distribution was simulated. To quantify the level of matching ML, special formula was used. The ML parameter had a value between 0 and 100%, where 100% indicated a perfect fit between the model and the 3D printed bolus. Results: We verified that 100% of the volume of the 3D printed bolus was located within the contour of the designed model. The ML of the bolus was 94%. For the classical paraffin bolus the ML was only 28%. Conclusion: A bolus printed on a three-dimensional printer can faithfully reproduce the structure specified in the project plan. Compared to the classical paraffin bolus, the three-dimensional printed bolus more closely matched the planned model and possessed greater material uniformity
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله m lukowiak | m. lukowiak
department of medical physics, west pomeranian oncology center, szczecin, poland


m boehlke | m. boehlke
department of medical physics, west pomeranian oncology center, szczecin, poland


m lewocki | m. lewocki
department of medical physics, west pomeranian oncology center, szczecin, poland


w kot | w. kot
department of medical physics, west pomeranian oncology center, szczecin, poland


d matias | d. matias
copernicus sp. zo.o., szczecin, poland


m piątek hnat | m piątek hnat
institute of polymers, department of biomaterials and microbiological technology, west pomeranian university of technology, szczecin, poland


m el fray | el fray
institute of polymers, department of biomaterials and microbiological technology, west pomeranian university of technology, szczecin, poland

k jezierska | k. jezierska
department of medical physics, pomeranian medical university, szczecin, poland


w podraza | w. podraza
department of medical physics, pomeranian medical university, szczecin, poland
نشانی اینترنتی http://ijrr.com/browse.php?a_code=A-10-1-631&slc_lang=en&sid=en
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/42/article-42-311156.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده Radiation Biology
نوع مقاله منتشر شده مرور و بررسی کلی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات