این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۵، شماره ۳، صفحات ۱۰۷۱-۱۰۸۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Coupling Discontinuous Deformation Analysis and Displacement Discontinuity Method for Simulating Failure Mechanism in Geomaterials
چکیده انگلیسی مقاله Complexity of geomaterial’s behavior is beyond the capabilities of conventional numerical methods alone for realistically model rock structures. Coupling of numerical methods can make the numerical modeling more realistic. Discontinuous Deformation Analysis (DDA) and Displacement Discontinuous Method (DDM) are hybridized for modeling block displacement and crack propagation mechanism in a blocky rock mass. DDA is used to compute the displacements of the blocks, and DDM is used to predict the crack propagation paths due to the specified boundary conditions. The displacements obtained from DDA are converted into stress and considering Kelvin's solution of the problem the crack propagation mechanism within each block is investigated. Boundary stresses are updated due to crack propagation and new stress boundary conditions in DDA. This cycle continued until crack propagation stopped or a new block formed. Numerical solutions of the experimental rock samples including two random cracks with crack 1 fixed and crack 2 created with different angles and one crack with a slope angle of 30 degrees are compared with the existing experimental and numerical results. This comparison validates the accuracy and effectiveness of the proposed procedure because crack propagation paths predicted are in good agreement with the corresponding experimental results of rock samples.
کلیدواژه‌های انگلیسی مقاله Geomaterials, Discontinuous deformation analysis, displacement discontinuity method, Crack Propagation, Coupled numerical methods
نویسندگان مقاله Mohsen Khanizadeh Bahabadi |
Faculty of Mining and Metallurgical, Department of Mine Exploitation Engineering, Yazd University, Yazd, Iran

Alireza Yarahamdi Bafghi |
Faculty of Mining and Metallurgical, Department of Mine Exploitation Engineering, Yazd University, Yazd, Iran

Mohammad Fatehi Marji |
Faculty of Mining and Metallurgical, Department of Mine Exploitation Engineering, Yazd University, Yazd, Iran

Hossein Shahami |
Faculty of Mining and Metallurgical, Department of Mine Exploitation Engineering, Yazd University, Yazd, Iran

Abolfazl Abdollahipour |
School of Mining Engineering, College of Engineering, Tehran University, Tehran, Iran

نشانی اینترنتی https://jme.shahroodut.ac.ir/article_3019_5034c8f2329c851473950b6c407f5cf5.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات