این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
سه شنبه 25 آذر 1404
Iranian Journal of Medical Physics
، جلد ۲۱، شماره ۳، صفحات ۲۱۱-۲۱۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Dosimetric Characterization of 3D Printed Bolus with Polylactic Acid (PLA) in Breast Cancer External Beam Radiotherapy
چکیده انگلیسی مقاله
Introduction: In this study, 3-Dimention (3D) polylactic acid (PLA) bolus were characterized as human tissue equivalent and specially designed for use in electron radiotherapy of breast cancer. Material and Methods: This study uses the main material PLA with variations in the infill percentage when printing, which is (20, 40, 60, 80, and 100) %. Dosimetric characterization included measuring the value of Relative Electron Density (RED) and measuring the absorbed dose using LINAC 15 MeV, which was tested using a breast mannequin and compared with a commercial bolus at Andalas University Hospital. Results: The results showed that the 3D bolus made of PLA provided uniformity in terms of thickness so that every part of the body surface covered by the bolus would get an even dose. 3D bolus made of PLA in all variations in the infill percentage had a RED value equivalent to human tissue. They can help ensure that the bolus does not significantly change the radiation dose distribution, achieving optimal treatment outcomes. However, a bolus with an infill percentage of 20% has a RED value closest to the breast RED, which is 0.99 and can absorb radiation of 1.98 Gy more optimally compared to a commercial bolus that can absorb 1.97 Gy from 2 Gy doses given. Conclusion: The 3D bolus made of PLA can be an effective alternative for treating breast cancer using electron radiotherapy.
کلیدواژههای انگلیسی مقاله
3D Bolus, Absorbed Dose, infill percentage, Polylactic Acid, relative electron density
نویسندگان مقاله
| Annisa Yuliandari
Departement of Physics, Faculty of Mathematics and Natural Science, Universitas Andalas, Padang, West Sumatra, Indonesia
| Sri Oktamuliani
Departement of Physics, Faculty of Mathematics and Natural Science, Universitas Andalas, Padang, West Sumatra, Indonesia
| Harmadi Harmadi
Departement of Physics, Faculty of Mathematics and Natural Science, Universitas Andalas, Padang, West Sumatra, Indonesia
| Fiqi Diyona
Andalas University Hospital, Padang, West Sumatra, Indonesia
نشانی اینترنتی
https://ijmp.mums.ac.ir/article_22135.html
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
Original Paper
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات