این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 27 آذر 1404
Journal of Mining and Environment
، جلد ۱۵، شماره ۴، صفحات ۱۱۷۷-۱۱۹۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Performance Evaluation of Zinc Tailing Waste Material for Embankment Construction: Experimental and Numerical Investigation
چکیده انگلیسی مقاله
The rapid development of road networks needs huge construction materials. Mining and industrial wastes can be used as sustainable road construction materials and will be alternatives to fulfill the huge demand in road construction. Zinc tailing is one such mining waste and has the potential for road construction. This material was collected from Zawar mines (Rajasthan), and characterization was carried out for embankment/subgrade applications. A physical model test was conducted in the laboratory to examine the stress-settlement behaviour. To improve the modulus value of tailing, it was reinforced with geogrid in two different laying patterns, viz. layer/loop and stress-settlement behavior was studied. Different parameters were studied: reinforcement depth, layer of reinforcement, number of loops, and depth of loop of reinforcement. The experimental result was validated with the numerical finite element method (SoilWorks). Tailing comprises fine-grained silt-size particles (61%) with no swelling behavior and non-plastic nature. It has values of MDD and OMC as 1.86 g/cm
3
and 11%, respectively. It has a higher value of CBR (12%) and internal friction angle (34.6
o
) with cohesionless nature. The variation of settlement with stress is linear for reinforced and unreinforced tailing fill. As the depth of reinforcement increases, settlement increases in both layer and loop reinforcement. The settlement trajectory obtained from a numerical method closely resembles that of a laboratory physical model, particularly when the applied stress is up to 600 kPa. The modulus of elasticity of tailing was significantly improved with the introduction of geogrid reinforcement either in layer or loop.
کلیدواژههای انگلیسی مقاله
Zinc tailing, waste material, geogrid, embankment, Numerical Analysis
نویسندگان مقاله
Pankaj Bhatt |
Department of Civil Engineering, Chandigarh University, Mohali, India
Anil Kumar Sinha |
CSIR-Central Road Research Institute, New Delhi, India
Mariya Dayana P J |
CSIR-Central Road Research Institute, New Delhi, India
Parvathi Geetha Sreekantan |
CSIR-Central Road Research Institute, New Delhi, India
Murtaza Hasan |
Department of Civil Engineering, Chandigarh University, Mohali, India
نشانی اینترنتی
https://jme.shahroodut.ac.ir/article_3178_d5248f3eabe5653b2d41369101d4c3ad.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات