این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۸، شماره ۱، صفحات ۱۷۱-۱۹۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Parametric Analysis of Cooling of Air Inside a Ventilated Enclosure - A Convenient Solution to Achieve Single Room Multiple Thermal Zones for Indoor Farming
چکیده انگلیسی مقاله
This paper explores the potential of a cylindrical enclosure with vent holes to create and maintain the desired thermal environment for indoor farming. Different thermal zones can be made in a single room when such enclosures are used in multiple numbers in a single room. A comparative analysis of twelve different air cooling/heating configurations was conducted. Each cylindrical enclosure is air-filled, with two heat sinks facing each other and vent holes in the top and bottom surfaces. Six configurations had heat sinks oriented vertically, and the other six had heat sinks inclined at 45°. These configurations (vertical and inclined heat sinks) have been studied for different heat sink temperatures and sidewall heat flux conditions. The numerical simulations were conducted using ANSYS-Fluent. The studies have shown that different thermal environments can be created inside the enclosure, and cooling can be achieved with sufficient air exchange through vent holes. The instabilities due to buoyancy-driven flow are found to be necessary for air exchange through vent holes. Validation studies have shown that the heat flux from the sidewall should be considered, even if it is an excellent thermal insulator.
کلیدواژههای انگلیسی مقاله
Thermal zone,Heat sink,Ventilated Enclosure,CFD analysis,Air Exchange
نویسندگان مقاله
A. D. Chaudhari |
School of Mechanical Engineering, VIT Vellore, Tamilnadu, 632014, India
P. Bhupathi |
VIT School of Agricultural Innovations and Advanced Learning, VIT Vellore, Tamilnadu, 632014, India
V. V. Joshi |
School of Mechanical Engineering, VIT Vellore, Tamilnadu, 632014, India
نشانی اینترنتی
https://www.jafmonline.net/article_2551_55d8501d9fb37e13b57dc853bf986c87.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات