این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۹، صفحات ۱۷۹۲-۱۸۰۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Distribution of the Velocity Profile via Analytical and Three-Dimensional Numerical Vegetation Modeling
چکیده انگلیسی مقاله Understanding the ecological conditions of vegetation growth in water sources is vital to appraise the influence of vegetation on river engineering. Based on the experimental information that is accessible, the consequences of vegetation on flow resistance is described as an alteration in the drag coefficient and the planned area.  The current study analytically estimates the vertical distribution of stream-wise velocity in open-channel flow while considering rigid and flexible vegetation. The flow is vertically separated into top free water layer and bottom vegetation layer using the projected deflection height of both vegetation. Related momentum calculations for each layer are then derived. Based on the gathered experimental data, a 3D numerical model with various simulation situations is used to model, calibrate, and evaluate the artificial cylinders. A considerable deflection analysis is utilised to calculate the velocity-dependent stem height. This has proven to be more precise compared to formerly deflection investigation. The estimated outcomes show that precise predictions may be made for the vertical contours of vertical Reynolds shear stress based on mean horizontal velocity. The numerical simulations demonstrate that plant flexibility reduces the vertical Reynolds shear stress and prompted flow resistance force of the vegetation.
کلیدواژه‌های انگلیسی مقاله Open-channel flow,Analytical model,Numerical Model,velocity distribution,ANSYS Fluent,3D Simulation
نویسندگان مقاله A. A. Hussain |
Department of Mechanical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford, BD7 1DP, UK

M. A. Al-Obaidi |
Technical Institute of Baquba, Middle Technical University, Baghdad 10074, Iraq

A. S. Mohammed |
Civil Engineering Department, College of Engineering, University of Sulaimani, Iraq

Y. M. John |
Department of Chemical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford, BD7 1DP, UK

F. L. Rashid |
Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala 56001, Iraq

نشانی اینترنتی https://www.jafmonline.net/article_2457_866a3aad8179110bed5a5c46eacdc21b.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات