این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۸، صفحات ۱۶۴۳-۱۶۵۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effects of Fence on the Spanwise Aerodynamic Characteristics of an Aircraft Wing Profile with Various Taper Ratios
چکیده انگلیسی مقاله This paper investigates the effects of the chordwise fence on the spanwise change in aerodynamic characteristics of an aircraft wing with a different taper ratio for varying angles of attack. The investigation was carried out for the tapered wing with different taper ratios of 0.41, 0.6, and 0.75. The wing is tested in a subsonic, low turbulence wind tunnel at the free stream Reynolds number of 2.3×105 for various angles of attack ranging from α = 0° to 45°. The baseline wing model is attached to a fence of different diameters of 1.5 and 2.5 mm at a plane equal to the root and tip chord. There are pressure ports spread across the span of the wing, and the corresponding surface pressure is measured using the MPS 4264 miniature pressure scanner. The surface pressure measured is analyzed further for the variation of the aerodynamic characteristics of the wing. The presence of a fence on the tapered wing forms an efficient flow control device that delays the flow separation, thereby delaying stall angles and preventing the steep transition of the favorable pressure gradient to the adverse pressure gradient at the stall. The presence of a fence on the wing surface has considerably increased the lift coefficient, and the stall is significantly delayed for a least taper ratio wing. The fence has suppressed the interaction of the leading-edge vortices with the tip vortices; thereby, the spanwise flow from the root chord to the tip chord is controlled.
کلیدواژه‌های انگلیسی مقاله Fence mean chord ratio,Lift Coefficient,Pressure coefficient,Wind tunnel testing,Spanwise flow
نویسندگان مقاله T. A. Sundaravadivel |
Faculty of Mechanical Engineering, R.M.D. Engineering College, Chennai, Tamil Nadu-601206, India

E. Karthik Vel |
School of Mechanical Engineering, SASTRA Deemed to be University, Thanjavur, Tamil Nadu-613401, India

S. Nadaraja Pillai |
School of Mechanical Engineering, SASTRA Deemed to be University, Thanjavur, Tamil Nadu-613401, India

نشانی اینترنتی https://www.jafmonline.net/article_2447_3da441913e572fde0f123dadfc21729a.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات