این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۸، صفحات ۱۷۳۰-۱۷۴۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Simulation of Gas-liquid Two-phase Flow in Emergency Rescue Drainage Pump Based on MUSIG Model
چکیده انگلیسی مقاله To investigate the gas-liquid two-phase flow characteristics in an emergency rescue drainage pump, the MUSIG model was adopted to analyze the effect of the gas phase on the internal flow characteristics of the pump. The results show that the gas phase predominantly accumulated in the impeller region, with significant tendencies for large diameter bubbles to fragment into smaller diameter bubbles. The bubbles of the impeller blades converged towards the middle zone of the blade near the hub, forming an air pocket that obstructed the flow passage through the impeller. Such findings ultimately resulted in a loss of pump performance. Moreover, as the diameter of inlet bubble increased, there was a greater tendency for the gas phase to converge into a concentration distribution, leading to unfavorable flow conditions in the pump. This phenomenon ultimately led to a decline in pump performance and may have resulted in the loss of water conveyance functionality. Meanwhile, the Ω method was used to investigate the vortex flow within the drainage pump under different gas contents. As the inlet gas volume fraction increased, the vortex area expanded and the vortex tended to fragment into multiple smaller pieces, resulting in the formation of more complex structures.
کلیدواژه‌های انگلیسی مقاله Gas-liquid two-phase flow,MUSIG model,Gas phase diameter,Vortex
نویسندگان مقاله W. Cao |
Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, People’s Republic of China

X. Yang |
Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang, People’s Republic of China

H. Wang |
Wenling Fluid Machinery Technology Institute of Jiangsu University, Wenling, Zhejiang 317500, People’s Republic of China

X. Leng |
Wenling Fluid Machinery Technology Institute of Jiangsu University, Wenling, Zhejiang 317500, People’s Republic of China

نشانی اینترنتی https://www.jafmonline.net/article_2453_4b5244e17620e216700f268747956001.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات