این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۶، صفحات ۱۱۷۱-۱۱۸۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Flow Separation Control of an Ultra-compact S-shaped Convergent-divergent Nozzle Using the Blowing Method
چکیده انگلیسی مقاله To enhance the aerodynamic performance of an ultra-compact S-shaped convergent-divergent nozzle and mitigate flow separation, numerical simulations were conducted using FLUENT software. The study employed the k-ω shear stress transport turbulent model to investigate a flow control method involving blowing. Detailed analysis was performed on the impact of blowing position, angle, and pressure ratio on controlling flow separation. The findings indicate that as the blowing position moves backward, the flow separation area diminishes. Additionally, downstream flow separation ceases at smaller blowing angles within the separation zone. However, excessively large blowing angles tend to create an “aerodynamic wall,” causing significant upstream flow loss and nozzle performance degradation. Enhancing the blowing pressure ratio, given proper mixing with low-energy fluid and no interference with the main flow, can improve the nozzle's aerodynamic performance. Under the optimal blowing scheme, the total pressure recovery coefficient and thrust coefficient are increased by approximately 0.52% and 3.75%, respectively, when compared with those of the reference nozzle.
کلیدواژه‌های انگلیسی مقاله S-shaped nozzle,Flow separation,Blowing control method,Flow control,Numerical simulation
نویسندگان مقاله J. W. Shi |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaan Xi Province, 710072, China

Z. H. Hui |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaan Xi Province, 710072, China

L. Zhou |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaan Xi Province, 710072, China

Z. X. Wang |
School of Power and Energy, Northwestern Polytechnical University, Xi’an, Shaan Xi Province, 710072, China

نشانی اینترنتی https://www.jafmonline.net/article_2414_0fc9ccd73bcf5fb358be9824f5b8d371.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات