این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۶، صفحات ۱۳۲۲-۱۳۳۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Numerical Analysis of Film Cooling Flow Dynamics and Thermodynamics for Perfect and Imperfect Cooling Holes
چکیده انگلیسی مقاله Film cooling protects high-temperature components and generates complex vortex structures through the interaction between the mainstream flow and the injected coolant. Additionally, the process of applying thermal barrier coatings introduces imperfect cooling holes. A numerical simulation study is conducted on two geometric configurations: inclined perfect and imperfect holes arranged in a single row on a flat plate to investigate the effects of flow field vortex structures and hole imperfections. The k-epsilon turbulent model is employed to analyse the impact of varying blowing ratios and defect positions on flow field structure and cooling efficiency, with vortex dynamics providing explanatory insights. As the blowing ratio increases, the kidney vortex associated with the perfect holes progressively detaches from the wall, reducing film cooling efficiency. The kidney vortex originates from the shear interaction between the mainstream and the impinging jet, predominantly influenced by the vortex stretching component. Imperfect holes influence the distribution state of the kidney vortex, with weakened roll-up phenomena observed at the IT4 defect location. Consequently, a noticeable enhancement in film cooling effectiveness is achieved near the proximal end of the hole. 
کلیدواژه‌های انگلیسی مقاله Film cooling,Kidney vortex,Vortex dynamic,Adiabatic cooling effectiveness
نویسندگان مقاله S. Liang |
Department of Fluid Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China

R. L. Dong |
Department of Fluid Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China

W. W. Xu |
Department of Fluid Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China

Y. Q. Wei |
Department of Fluid Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China

نشانی اینترنتی https://www.jafmonline.net/article_2425_c4668269e6124c3aa8f8f83a15a0151e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات