این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۷، شماره ۵، صفحات ۱۰۲۷-۱۰۳۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Manipulation of Supersonic Jet using Grooved Tabs
چکیده انگلیسی مقاله
This study experimentally evaluated the mixing augmentation of twin tabs mounted along a diameter at the outlet of a convergent-divergent Mach 1.62 circular nozzle. The usefulness of the plain and grooved tabs is examined at various expansion levels prevailing at nozzle outlet. The tab's performance is assessed through pitot pressure distribution measured along and perpendicular to the jet centerline at different nozzle pressure ratios (NPRs). The shadowgraph technique visualized the shocks and expansion fans in uncontrolled and controlled jets. With the introduction of uncorrugated or plain tabs at the nozzle outlet operating under overexpanded conditions corresponding to NPR 4, the supersonic length (SL) was decreased only by 35.4%. On the other hand, the corrugated or grooved tabs under similar conditions decreased the SL substantially. Interestingly, the performance of grooved tabs was best at underexpanded conditions associated with NPR 6, where the SL was reduced by about 88%. The pressure profiles also established the superiority of tabs with grooved edges in mixing augmentation without introducing any significant asymmetry to the flow field. In addition, the Shadowgraph images also confirmed the weakening of shock strength and reduction of shock-cell length in the case of grooved tabs at the nozzle exit compared to the plain nozzle.
کلیدواژههای انگلیسی مقاله
Shock-cell,Supersonic length,Tab,Jet mixing,Flow visualization
نویسندگان مقاله
A. K. Mali |
Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur – 721302, India
T. Jana |
Department of Aerospace Engineering, B.M.S. College of Engineering, Bengaluru - 560019, India
M. Kaushik |
Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur – 721302, India
S. Thanigaiarasu |
Department of Aerospace Engineering, MIT Campus, Anna University, Chennai – 600044, India
نشانی اینترنتی
https://www.jafmonline.net/article_2404_30ee2f8d71b708906d826879b71f4ca9.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات