این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۵، صفحات ۱۰۹۹-۱۱۱۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Enhancement of Jet Mixing using Stepped Tandem Tabs
چکیده انگلیسی مقاله Mixing characteristics of jet emerging from a subsonic nozzle exit has been experimented and the results are compared with uncontrolled jet and controlled jet configurations. The mixing enhancement was achieved using a passive method of jet control in which tandem tabs arrangement with rectangular cross section are fixed at the nozzle exit. Two Tab configurations, the Tandem tab (TT) and Stepped Tandem Tab (STT) are used to enhance the mixing characteristics of the jet, the aspect ratio (length /width) of the tabs was 1.67 offering a blockage ratio of 9.55% to the nozzle exit. The blockage ratio of TT and STT configurations are maintained to be equal so that the mixing characteristics can be compared. The axial and radial jet spread are compared for nozzle exit Mach numbers of 0.6, 0.8 and 1.0. The TT controlled jet offered a potential core reduction of 63%, 78% and 82% for Mach numbers 0.6, 0.8 and 1.0 respectively. The STT controlled jet offered a potential core reduction of 89%, 90% and 85% for Mach numbers 0.6, 0.8 and 1.0 respectively. The radial spread of uncontrolled jet, controlled jet with TT and STT are plotted at several X/D locations and found that the controlled jets have more jet spread in both radial directions. A simulation is conducted for jets with exit Mach number 0.8 and the results are validated with the experimental findings. Based on the preliminary experimentation and computation, the STT controlled jet achieved better jet mixing through more potential core reduction and radial spread characteristics as compared to the TT configuration and base nozzle. 
کلیدواژه‌های انگلیسی مقاله Jet mixing,Mass entrainment,Potential core,Uncontrolled jet,Tandem tab,Stepped tandem tab
نویسندگان مقاله S. Venkatramanan |
Department of Aeronautical Engineering, KCG College of Technology, Chennai, Tamil Nadu, 600 097, India

S. Thanigaiarasu |
Department of Aerospace Engineering, MIT Campus, Anna University, Chennai, Tamil Nadu, 600 044, India

M. Kaushik |
Department of Aerospace Engineering, Indian Institute of Technology, Kharagpur, West Bengal, 721 302, India

نشانی اینترنتی https://www.jafmonline.net/article_2409_39f931c5d0f888fa607074cd475e3e60.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات