این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۷، شماره ۴، صفحات ۸۲۸-۸۴۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Semi-elliptical Outer Blade-surface on the Savonius Hydrokinetic Turbine Performance: A Numerical Investigation
چکیده انگلیسی مقاله The Savonius hydrokinetic turbine (SHT) is widely used for generating electricity from running water. However, most optimization work has been carried out on conventional blades with similar concave and convex profiles. This study aims to enhance SHT performance by modifying the rotor blades' outer surface radius (0.079, 0.087 and 0.095 m) to create a semi-elliptical shape, thus reducing opposing forces. The tip speed ratio (TSR) varies from 0.5 to 1.3 with an interval of 0.1. A constant channel velocity of 0.8 m/s at Re = 2.25 × 105 is considered for the analysis. The flow field has been numerically investigated using the SST k - ω model. This study comprises the angular variation in the coefficients of power (Cp) and torque (Cm), performance curves of the rotor, and pressure distribution on the blade surface at different angular positions. It is observed that the rotor with a radius of 0.095 m has a maximum Cp value of 0.142, which is 7.57% and 18.33% higher than the Cp values of rotors with radii of 0.079 m and 0.087 m, respectively. The maximum power output of the rotor with a radius of 0.095 m is 2.32 W, whereas the power outputs of the rotors with radii of 0.087 m and 0.079 m are 2.16 W and 1.96 W, respectively. An increase in the instantaneous values of Cm between rotation angles 0◦ to 115◦ is observed, during which the returning blades mainly interact with the incoming stream. The pressure decreases as the radius of the semi-elliptical outer surface increases at rotor positions ranging from 0◦ to 225◦, but it increases at rotor positions ranging from 270◦ to 315◦.
کلیدواژه‌های انگلیسی مقاله SHT,Power and torque coefficients,SST k - ω model,Flow characteristics,Computational fluid dynamics,OpenFOAM
نویسندگان مقاله G. V. Babu |
School of Mechanical Engineering, Vellore Institute of Technology, Vellore – 632014, India

D. K. Patel |
School of Mechanical Engineering, Vellore Institute of Technology, Vellore – 632014, India

نشانی اینترنتی https://www.jafmonline.net/article_2389_d8e981231e9766f70de0e7e4451873e3.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات