این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 5 دی 1404
Journal of Computational and Applied Research in Mechanical Engineering - JCARME
، جلد ۱۴، شماره ۱، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
The effect of Cu concentration on tensile and compression properties of Ti-10Mo alloy using molecular dynamics simulations
چکیده انگلیسی مقاله
Titanium alloys have been extensively explored and fabricated for application in several engineering fields. Its superior mechanical properties, Ti-10Mo-xCu alloy has potential applications in hip implants. Determining mechanical qualities via experimental methods takes a long time, especially when carried out in compression and tensile testing. Therefore, material design modeling using an MD simulation method approach is used to evaluate the mechanical properties of the compression and tensile tests of the Ti-10Mo-xCu alloy. In this research, material design through computer modeling is carried out at 300 K in the x <100> direction of the Ti-10Mo alloy with the addition of Cu composition at 3, 6, and 9 wt.% to evaluate the properties of the alloy. The simulation results of the Cu addition produces maximum stresses of 603, 160, and 236 Mpa, respectively. The experimental method in the compression test shows a decrease in the maximum stress after adding Cu to the Ti-10Mo alloy. It has the same trend value as the compression test outcomes on the experiment and MD simulation method. The result of tensile strength for the Ti-10Mo-xCu alloy are 7056.8, 7238.2, and 7433.1 Mpa, respectively. MD simulation of the results of crack propagation in tensile strength is successfully performed based on the increase at high strain until plasticity occurs in the alloy.
کلیدواژههای انگلیسی مقاله
TiMoCu alloys, Compression loading, Tensile loading, MD simulations, Structure evolution
نویسندگان مقاله
Aji Abdillah Kharisma |
Department of Mechanical Engineering, Gunadarma University, Depok, Indonesia
Haris Rudianto |
Department of Mechanical Engineering, Gunadarma University, Depok, Indonesia
Achmad Benny Mutiara |
Department of Information Technology, Gunadarma University, Depok, Indonesia
Sulistyo Puspitodjati |
Department of Information Technology, Gunadarma University, Depok, Indonesia
نشانی اینترنتی
https://jcarme.sru.ac.ir/article_2201_3819b3f2c6a607f35788c5704e8b8c0e.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات