این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۶، شماره ۱، صفحات ۲۲۳-۲۳۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Failure Mechanisms of Concrete-Bolt Attachment Surface: Impact of Cable Bolt Indent Number and Shape
چکیده انگلیسی مقاله The mechanical behavior of rock-rock bolt interface considering the effects of indents’ shape and their number was numerically simulated based on discrete element method using the two-dimensional particle flow code. The conventional and standard uniaxial compressive and Brazilian tensile strengths tests were used to calibrate the modelled samples with 100 cm 100 cm in dimension. The numerical models were prepared such that different indent shape and number were inserted in the cable bolts arrangements during the rock reinforcement process. The effects of confining pressure 3.7 MPa and different shear failure loads were modeled for the punch shear test of the concrete specimens. The results of this study showed that the dominant failure mode of the rock-cable bolt interface was of tensile mode and the shape and number of cable indents significantly affected the strength and mechanical behavior of the modelled samples. It has also been showed that the indent dimensions and number affected the shear strength of the interfaces.
کلیدواژه‌های انگلیسی مقاله tensile strength,Rock bolt indent shape,Interface,Discrete Element Method
نویسندگان مقاله Vahab Sarfarazi |
Department of Mining Engineering, Hamedan University of Technology, Hamedan, Iran

Lei Zhou |
State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, 610500, China

Hadi Haeri |
Department of Mining Engineering, Higher Education Complex of Zarand, Shahid Bahonar University of Kerman, Kerman, Iran.

Parastou Salehipour |
School of natural resources and the environment, West Virginia University, Morgantown, West Virginia, USA

Ali Elahi |
Department of Mining Engineering, Higher Education Complex of Zarand, Shahid Bahonar University of Kerman, Kerman, Iran.

Ali Moayer |
Department of civil engineering, Islamic Azad University of Shiraz, Shiraz, Iran.

Mohammad Fatehi Marji |
Department of Mine Exploitation Engineering, Faculty of Mining and metallurgy, Institute of Engineering, Yazd University, Yazd, Iran

نشانی اینترنتی https://jme.shahroodut.ac.ir/article_3235_eb2199a328f338df7c1156457f474548.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات