این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 27 آذر 1404
Journal of Mining and Environment
، جلد ۱۶، شماره ۱، صفحات ۲۸۹-۳۰۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Participation of Analytical Parameters in Predictive Empirical Models for Rock Mass Deformation Modulus: A Review
چکیده انگلیسی مقاله
The deformation modulus of rock mass is necessary for stability analysis of rock structures, which is generally estimated by empirical models with one to five input parameters/indexes. However, appropriate input parameter participation to establish a sound basis for a reliable prediction has been a challenging task. In this study, the concept of the principal input parameters was developed based on an analytical method with an emphasis on in situ stress. Based on analytical methods, Young’s modulus of intact rock, the joint’s shear and normal stiffness, joint set spacing, and in situ stress are introduced as the main principal input parameters. A review of seventy empirical models revealed that most of them suffered from a lack of analytical parameters. Due to considering practical issues, the geological strength index (GSI) is replaced with joint set spacing; moreover, the in situ stress effect is perceived by combining Young’s modulus and joint stiffness with specific confining pressure and normal stress, respectively. The integration of the analytical base input parameters and practical issues enhanced the reliability of empirical models due to the reasonable prediction of the deformation modulus to numerical or analytical deformability analysis.
کلیدواژههای انگلیسی مقاله
Deformation modulus,Analytical parameters,In situ stress,joint stiffness,Geological strength index
نویسندگان مقاله
Mohammad Reza Shahverdiloo |
Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
Shokroallah Zare |
Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran
نشانی اینترنتی
https://jme.shahroodut.ac.ir/article_3184_88542c7bb602ba02fd3b3e4e6ec620ff.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات