این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
دوشنبه 24 آذر 1404
International Journal of Mining and Geo-Engineering
، جلد ۵۸، شماره ۴، صفحات ۴۰۱-۴۱۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Evaluating the relationship of vertical drilling rate with rock properties in the Marble quarry mining
چکیده انگلیسی مقاله
In this research, the relationship of vertical drilling rate (
VDR
) with rock properties is studied in the marble quarry mining based on the combination of field surveys and laboratory experiments. To achieve this, the
VDR
is initially measured while drilling at the Malawi marble quarry mine. Then, the physical and mechanics tests are conducted on the core specimens prepared from the collected minor blocks corresponding to the under-drilling mine benches. Parametric study revealed that natural density, dry density, slake durability index, Schmidt hammer rebound, compression wave velocity, point load index, uniaxial compressive strength and modulus of elasticity exhibit an inverse relationship with
VDR
. Conversely, VDR was found to have a direct relationship with porosity, water content, Los Angeles abrasion, and Poisson ratio. Moreover, it was confirmed that
VDR
is more correlated with the rock mechanical properties rather than the rock physical features, considering the obtained mean coefficient of determination (
COD
) of 0.8948 vs. 0.9206. Besides, sensitivity analysis showed that modulus of elasticity and water content are the most and least effective variables on
VDR
with an influence value of 1.152 and 0.8865, respectively. Additionally, statistical analyses are conducted and optimum empirical quadratic, power, and exponential relations with high accuracy (
COD
values from 0.861 to 0.987) are proposed to determine the
VDR
based on each rock property. Finally, comparative analysis is conducted for further verification of the current study. Accordingly, the values of lower and upper limits of
COD
, and mean relative error are obtained 0.36, 0.9576, and 0.359 for previous researches vs. 0.861, 0.987, and 0.114% for this study. These results confirm the superiority of the current research compared to the similar previous studies.
کلیدواژههای انگلیسی مقاله
Marble quarry mining,Parametric Study,Rock Properties,Statistical analysis,Vertical drilling rate
نویسندگان مقاله
Mohammad Rezaei |
Department of Mining Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran.
Navid Nyazyan |
Lead consultant, Mine stability department, WSP Global Inc., Colorado, USA.
Mostafa Asadizadeh |
Lead consultant, Mine stability department, WSP Global Inc., Colorado, USA.
نشانی اینترنتی
https://ijmge.ut.ac.ir/article_99181_762dde0fa1900b4849a837c70644b854.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات