این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Mining and Geo-Engineering، جلد ۵۸، شماره ۴، صفحات ۴۳۹-۴۴۴
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Block caving underground mining technique under an existing open-pit mine: Investigating the effect of undercut depth on crown pillar thickness
چکیده انگلیسی مقاله Block caving method is the most suitable underground mining method for metal deposits that have reached their transition depth. The stability of the pit floor and slopes of these mines is critical to ensure safety and prevent damage to surface infrastructure. In this paper, the process of block caving under the open pit mine is modeled by numerical simulation using Phase 2 software. The effect of undercut depth on the caving height and the thickness of the remaining crown pillar under the pit was investigated. The undercut was modeled at 200, 600, and 1000 meters below the pit floor. The results show that the height of the caving increases with increasing depth of the undercut. The maximum cave span also increases with the increment in depth. Also, as the depth increases from 200 to 600 meters, the thickness of the crown pillar increases five-fold, whereas by increasing the depth of undercutting from 600 to 1000 meters, the thickness of the crown pillar doubles. In addition, the ratio of the crown pillar thickness to the maximum caving span decreases as the depth of undercut increases. At depth of 200 meters to 600 meters, the mentioned ratio decreases severely; however, for depths between 600 meters and 1000 meters, the ratio decreases gradually.
کلیدواژه‌های انگلیسی مقاله Block caving,Open Pit,Transition depth,Numerical Modeling
نویسندگان مقاله Behnam Alipenhani |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.

Erfan Amini |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.

Hassan Bakhshandeh Amnieh |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.

Abbas Majdi |
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.

نشانی اینترنتی https://ijmge.ut.ac.ir/article_99952_fb5f54cbcdc06e30ed4300b127cc4150.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات