این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۳، شماره ۱۲، صفحات ۴۲۳۸-۴۲۵۰

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Enhancing Superconducting Properties of Thallium-Based Tl-1223 Thin Films through Optimized Rapid Thermal Annealing of Titanium Alloy Precursor Films on Lanthanum Aluminate Substrates
چکیده انگلیسی مقاله This paper shows the enhancements of a Tl-1223 high-temperature superconducting thin film prepared on lanthanum aluminate (LAO) substrates using an optimized rapid thermal annealing process. The annealing process of the precursor film was improved, and the effects  of different annealing conditions on the thalliation crystallization of the precursor film
were investigated. A precursor film of the Tl-based high-temperature superconducting thin film was first prepared on the surface of the LAO substrate using the magnetron sputtering process, followed by annealing treatment in a rapid thermal furnace. X-Ray Diffraction (XRD) characterization showed that both the annealing temperature and the heating rate significantly affect the phase formation of the precursor film. Through annealing optimizations, films with a Tc of 115K and Jc of 2.2 MA/cm2 were achieved, demonstrating enhanced superconducting performance. By adjusting the parameters, a Tl-1223 superconducting thin film with a highly oriented c-axis can be fabricated. Scanning Electron Microscopy (SEM) observations indicated that the superconducting films with good crystalline states have smooth and intact surface morphology, and the critical transition temperature (Tc) of the superconducting films prepared was measured at about 115K in liquid nitrogen. The films’ crystallinity was gauged using Atomic Force Microscopy (AFM) for three-dimensional information. 
کلیدواژه‌های انگلیسی مقاله Tl-1223 Superconducting Thin Film,Optimized rapid thermal annealing process,Lanthanum aluminate,magnetron sputtering

نویسندگان مقاله Han Xu |
Key Laboratory of New Electrical Functional Materials in Guangxi Universities, Nanning Normal University, Nanning, P.R. CHINA

Jin Yanying |
Key Laboratory of New Electrical Functional Materials in Guangxi Universities, Nanning Normal University, Nanning, P.R. CHINA

Wu Zhenyu |
Key Laboratory of New Electrical Functional Materials in Guangxi Universities, Nanning Normal University, Nanning, P.R. CHINA

Zhao Xinxia |
Key Laboratory of New Electrical Functional Materials in Guangxi Universities, Nanning Normal University, Nanning, P.R. CHINA

Xie Qinglian |
Key Laboratory of New Electrical Functional Materials in Guangxi Universities, Nanning Normal University, Nanning, P.R. CHINA


نشانی اینترنتی https://ijcce.ac.ir/article_717187_0ae37adf92aad6117259188974e38efd.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات