این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۳، شماره ۱۲، صفحات ۴۵۴۸-۴۵۵۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Activation of Fluorohydride by Various Chemical Additives for the Production of Construction Materials Based on It
چکیده انگلیسی مقاله In this study, we investigated the effects of various additives on the properties of fluorine hydrite binders, created by neutralizing acidic waste from hydrofluoric acid production. Our objectives included determining how the technological properties of anhydrite binders change with different additive amounts, identifying the optimal binder composition, developing mathematical models of the involved processes, and conducting statistical analysis through experimental design and mathematical planning. Particle-size analysis was performed using dynamic light scattering with a Fritsch Analysette-22, and the samples' phase composition was examined using an X'PertPro X-ray diffractometer (Philips Corporation, Netherlands). Calculations were performed using STATISTICA software. The studies showed that the setting speed and strength of products based on anhydrite binder are primarily influenced by the water temperature and amount used for mixing, assuming optimal binder dispersity. The strength of samples made from neutralized waste ranged from 0.5 to 1.2 MPa, while the strength of samples based on activated anhydrite binder ranged from 5.3 to 10.7 MPa, meeting the requirements for board production.
کلیدواژه‌های انگلیسی مقاله Anhydride binder,Chemical activation,Disposal,fluorogypsum,Industrial waste
نویسندگان مقاله Bauyrzhan Rakhadilov |
Research Center Surface Engineering and Tribology, Sarsen Amanzholov East Kazakhstan University, Ust-Kamenogorsk 070000, KAZAKHSTAN

Zhuldyz Sagdoldina |
Research Center Surface Engineering and Tribology, Sarsen Amanzholov East Kazakhstan University, Ust-Kamenogorsk 070000, KAZAKHSTAN

Aidar Kengesbekov |
Institute of Composite Materials, Ust-Kamenogorsk, 070000, KAZAKHSTAN

Arystanbek Kussainov |
Institute of Composite Materials, Ust-Kamenogorsk, 070000, KAZAKHSTAN

Saule Abdulina |
Institute of Composite Materials, Ust-Kamenogorsk, 070000, KAZAKHSTAN

نشانی اینترنتی https://ijcce.ac.ir/article_719365_c5690700fc61b37cff775de89e95acd6.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات