این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۴، صفحات ۹۰۴-۹۱۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Study of Stage Gap for a 2-bladed 2-stage Savonius-like-hydro-kinetic Turbine Performance Involving End Plates and Overlapping
چکیده انگلیسی مقاله Savonius-like-hydrokinetic turbine (SLHT) is a revelation for small-scale (micro/pico) power generation from perennial rivers at low water velocities and low tip speed conditions. However, for its operation at such sites, efficiency is to be improved by design modifications and flow control. This work entails a flow control strategy that combines the mean flow with overlapping flow, gap flow between stages, and flow between end plates. Here, the performance of a two-bladed two stage SLHT with end plates and 15% blade overlapping is examined in a water channel with stage gaps in mm (0-20), low water velocities in m/s (0.45-0.65) under applied braking loads in g (100-1500). The results demonstrate that SLHT produces more power and torque under a low-stage gap as the brake load rises, reaching the highest hydrodynamic torque (0.056 Nm) during a maximum load of 1250 g. The minimal stage gap is 5 mm, turbine braking loading 1250 g, 0.248 TSR, and 0.55 m/s water velocity yield the highest power coefficient (0.058), which is greater than some published SLHT designs. Thus, as much as blade profile modifications, flow control through SLHT can be the future direction for further improvement of its performance.
کلیدواژه‌های انگلیسی مقاله Savonius-like-hydrokinetic turbine,Turbine loading Power coefficient,Torque coefficient,Water velocity,Gap between stages,Overlapping,End plates
نویسندگان مقاله K. C. Sarma |
Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India

B. Nath |
Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India

A. Biswas |
Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India

R. D. Misra |
Department of Mechanical Engineering, National Institute of Technology Silchar, Assam, India

نشانی اینترنتی https://www.jafmonline.net/article_2605_3f065c00086eee73e4632d6765275636.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات