این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۴، صفحات ۱۰۸۶-۱۰۹۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effect of Pressure Equalization Groove Structure on Static Characteristics of Aerostatic Bearings
چکیده انگلیسی مقاله In order to improve the load capacity and stiffness, the pressure-equalizing groove is introduced into the structure of aerostatic bearing, which can optimize the mechanics characteristics. A Computational Fluid Dynamics (CFD) simulation of bearing with gas-lubricant is developed. The effects of pressure-equalizing groove depth, width, length, number, and supply air pressure on the load capacity, stiffness, and flow rate of orifice-throttle gas bearings are individually analyzed using COMSOL Multiphysics simulation software. The results are then experimentally validated. The results demonstrate that a groove structure designed to equalize pressure can enhance the load-bearing capacity and rigidity of orifice-throttle aerostatic bearings. The static performance of aerostatic bearing increase with the depth, width, number, and supply air pressure of the pressure-equalizing grooves. The peak stiffness of the bearing is significantly enhanced as the depth, width, and supply air pressure of the pressure-equalizing grooves increase. Moreover, the change of grooves number influence the geometric parameter  of the air film associated with the maximum stiffness. Different depths, numbers, and supply air pressures of the pressure-equalizing grooves significantly impact the flow rate. In contrast, the variations in width and length have a minor effect. The numerical simulation findings reveal a 71.67% increase in maximum load-bearing capacity and an 81.20% rise in peak stiffness for gas-floating bearings incorporating pressure-equalizing groove structures. Lastly, the congruence between experimental and simulated stiffness curve variations underscores the validity and robustness of the simulation methodology. 
کلیدواژه‌های انگلیسی مقاله Aerostatic Bearings,Pressure-Equalizing Grooves,Static Performance,Finite element simulation
نویسندگان مقاله C. Yuanqi |
School of Mechanical Engineering, Jiangsu University of Technology, Wujin, Changzhou, Jiangsu 213016, China

X. Yaping |
School of Mechanical Engineering, Jiangsu University of Technology, Wujin, Changzhou, Jiangsu 213016, China

L. Weining |
School of Mechanical Engineering, Jiangsu University of Technology, Wujin, Changzhou, Jiangsu 213016, China

G. Ning |
Jiangsu JITRI Jingkai High Value Manufacturing Co. Ltd. Kunshan, Suzhou, Jiangsu 215300, China

نشانی اینترنتی https://www.jafmonline.net/article_2617_a2299d6f79e4186b49337f6a4801b677.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات