این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۴، صفحات ۱۱۱۵-۱۱۲۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Design and Application of a Test Rig for Stationary Component Performance Measurement of Centrifugal Compressors
چکیده انگلیسی مقاله Experimental testing is an important method for studying centrifugal compressors. However, test rigs with rotating impellers are costly in terms of construction and operating expenses. To address this issue, this study introduces a stationary component performance test rig for centrifugal compressors using an existing wind tunnel. The rig comprises a blower to supply compressed air, a wind tunnel, and a test section of stationary centrifugal compressor model stage. Specially designed stationary guide vanes substitute the impeller to simulate the impeller outlet flow field. Flow field parameters are measured at the inlet and outlet of each model-scale stationary component using a five-hole probe. Measured results can be used to evaluate the performance of each stationary component. Comparison between measured data and CFD results reveals that the measurement results are in good agreement with CFD results. This validates the reliability of the built test rig and measurement. Afterwards an improved diffuser and return channel of the same centrifugal compressor model stage is tested. The experimental results show a 4% reduction in total pressure loss coefficient and a 1% increase in static pressure recovery coefficient compared to the original structure. These results align with the findings obtained on a rotating test rig, indicating the feasibility of the proposed stationary component aerodynamic performance test rig.
کلیدواژه‌های انگلیسی مقاله Centrifugal Compressors,Stationary Components,High flow coefficient,Stationary Guide Vanes,Experimental test
نویسندگان مقاله K. Zhao |
School of Energy and Power Engineering, Dalian University of Technology, Dalian, Liaoning, 116024, China

Y. Liu |
School of Energy and Power Engineering, Dalian University of Technology, Dalian, Liaoning, 116024, China

Y. Zhang |
Shenyang Blower Group Co., Ltd, Shenyang, Liaoning, 110869, China

X. Liu |
Shenyang Blower Group Co., Ltd, Shenyang, Liaoning, 110869, China

H. Shi |
Shenyang Blower Group Co., Ltd, Shenyang, Liaoning, 110869, China

نشانی اینترنتی https://www.jafmonline.net/article_2619_58a902b8b19022cfbc33cd39e2437464.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات