این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۴، شماره ۱، صفحات ۲۰۳-۲۱۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Effects of Geometry in 2D Simulations for Vortex-Induced Vibration of Bladeless Wind Turbines
چکیده انگلیسی مقاله In this study, the performance of various types of bladeless wind turbines and eddy formations are evaluated by CFD modeling. At first, a two-dimensional cylinder oscillation is simulated at Re = 51600. The results showed that the oscillation began in 0.2 seconds and that the system's oscillation and full eddy flow formed in 0.9 seconds. With a natural frequency of 2 Hz, it is also noted that the displacement range, flow velocity, and lift coefficient variations fall within the ranges of 0.8, 1-2, and 1-1.5, respectively. Secondly, four types of geometries, including circle, half-circle, half-circle-triangle, and half-circle-rectangle, are designed, and two-dimensional simulation is performed for these geometries. Significant parameters have been examined, including transversal displacement values, force drag and lift coefficients, and the vortex flow pattern formed behind these objects. It is discovered that the half-circle-triangle form has the lowest number of displacement vibrations and the maximum values of the displacement range height, velocity of the flow, and lift coefficient. The half-circle-rectangular shape had the highest frequency with a value of 5.75 Hz in comparison with the other geometries. Also, by examining the parameters mentioned in the half-circle-rectangle shape, it is found that for different Reynolds numbers, the largest response of the displacement range occurred at the lower Reynolds number, and that is the reason why the range response becomes weaker as the Reynolds number increases.
کلیدواژه‌های انگلیسی مقاله bladeless wind turbine,Vortex-Induced Vibration,Modeling,energy
نویسندگان مقاله Atena Das |
Department of Chemical Engineering, Faculty of Engineering, Razi University, Kermanshah, I.R. IRAN

Masoud Rahimi |
CFD Research Division, Advanced Chemical Engineering Research Center, Razi University, Kermanshah, I.R. IRAN

نشانی اینترنتی https://ijcce.ac.ir/article_719211_4a675022fa633c16a91d65d6c43d249f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات