این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۴، شماره ۱، صفحات ۲۳۵-۲۴۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Examining the Design Parameters of Solvents of Carbon Dioxide Production Unit Using Diesel Combustion Method
چکیده انگلیسی مقاله This study examines the design parameters of the solvents of the carbon dioxide production unit using the diesel combustion method in Petro refineries. Greenhouse gases, of which carbon dioxide is one of them, cause short-wavelength solar rays to pass through the clouds (they contain greenhouse gases) and after hitting the earth's surface, they are reflected and their wavelength increases and they turn from ultraviolet to infrared. The solvent used in this study was named Arihan White is a mixture of paraffinic and aromatic hydrocarbons with a carbon number of C-12 C-7 with a distillation range of 200-142 °C. Our findings illustrate that carbon dioxide, with its chemical formula and (weak) acidic properties, has many uses today as a primary and intermediate material. The first step in gas production is diesel combustion. Because monoethanolamine (MEA) solvent is used to separate combustion gases. This solvent is an amine-alcohol with a chemical formula that is highly sensitive to oxygen due to the presence of an alcoholic base, and upon contact with free oxygen, its alcoholic agent will turn into aldehyde and acid, which will eventually lead to the solvent becoming rotten. It can cause many complications in the system, such as reducing the production coefficient, loss of solvent, corrosion phenomenon, foaming, etc. Two types of hydrocarbon cutting are required to prepare this solvent. About 55% by weight of non-aromatic hydrocarbon cuts with a boiling range of 148 to 200 °C and about 45% of the remaining aromatic cuts with a boiling range of 148 to 200 °C.
کلیدواژه‌های انگلیسی مقاله Carbon dioxide,Diesel Combustion,Mono Ethanolamine,Solvent,Corrosion
نویسندگان مقاله Hussam Elddin Nabieh Khasawneh |
Al-Balqa Applied University, Department Chemical Engineering Department, JORDAN

S. Abdul Ameer |
Department of Automobile Engineering, ‏College of Engineering/Al-Musayab, ‏University of Babylon, IRAQ

Laith Yassen Qassem |
3Department of Medical Laboratory Technics, Al-Noor University College, Nineveh, IRAQ

Abbas Hameed Abdul Hussein |
Ahl Al Bayt University, ‏Karbala, ‏IRAQ

Haider Radhi Saud |
College of Health and Medical Technology, National University of Science and Technology, Dhi Qar, 64001, IRAQ

Ameer Hassan Idan |
Al-Zahrawi University College, Karbala, IRAQ

Hala Bahair |
Medical Technical College, Al-Farahidi University, IRAQ

Amir Samimi |
Project Coordinator, Shargan Consultant Company, I.R. IRAN

نشانی اینترنتی https://ijcce.ac.ir/article_718726_e9c876417ed0f7970aea2623791f1488.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات