این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۶، شماره ۲، صفحات ۴۷۹-۵۰۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Stability Assessment of Stopping Operations in Friable Ore Bodies under an Open Pit Mine using Strength-based Mining Sequence Factor
چکیده انگلیسی مقاله A novel underground mining method is proposed to extract friable chromite ore bodies in weak and weathered limonitic host rock below an open-pit mine. The conventional underground methods do not instil confidence since GSI (Geological Strength Index) of ore bodies and host rock lies below 35. Series of dimensions of transverse stopes along the strike are suggested based on a detailed analysis of multiple mining and backfilling operations by simulating 36 three-dimensional numerical models. For each operation or sequence, a strength-based “Mining Sequence Factor (MSF)” is devised that helps quantifying its equivalent strength compared to in-situ conditions. This factor along with the average equivalent plastic strain (AEPS) developed on the pillars as obtained from numerical models is used to determine the safe operations with desired yearly production target. The paper provides an in-depth analysis of this method and suggests minimum pillar dimensions of 40 m, whether in-situ or backfilled. The paper, in addition, lays the design of underground drives and their support system as per NGI (Norwegian Geotechnical Institute) guidelines and 3D numerical studies, the performance of which is analysed considering distribution of stress and equivalent plastic strain.
کلیدواژه‌های انگلیسی مقاله Friable ore and host rocks,Mining under open pit,Novel mining method,Mining Sequence Factor,Support system
نویسندگان مقاله Sruti Narwal |
Mining Engineering Department, Indian Institute of Technology, Kharagpur, India

Debasis Deb |
Mining Engineering Department, Indian Institute of Technology, Kharagpur, India

Sreenivasa Rao Islavath |
Mining Engineering Department, Indian Institute of Technology, Kharagpur, India

Gopinath Samanta |
Senior Technologist (Mining), Process Technology Group, Tata Steel Limited, Jamshedpur, India

نشانی اینترنتی https://jme.shahroodut.ac.ir/article_3327_4fc40eaa65068aa35f45239cb74388b9.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات