این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۱۱، شماره ۴، صفحات ۵۲-۶۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Investigation of the Mechanical Properties and Corrosion Resistance of Pure Titanium Sheets Through Climb and Conventional Milling: A Novel Approach for Military and Petrochemical Applications
چکیده انگلیسی مقاله This study investigates the influence of milling direction—climb milling and conventional milling—on the surface properties of 4 mm-thick pure titanium sheets, machined at a depth of 0.5 mm. The primary objective is to analyze and compare the effects of these milling methods on hardness, wear resistance, and corrosion behavior of titanium. A detailed experimental approach was employed, including hardness testing, wear analysis, and corrosion evaluation.
The results revealed that the milling method plays a crucial role in determining the final properties of titanium. Climb milling produced superior mechanical properties, achieving a maximum hardness of 334 HV, compared to 315 HV in conventional-milled samples, attributed to work hardening and a refined microstructure. Additionally, wear resistance improved with material loss reduced to 10.87 mg in climb-milled samples, compared to 9.99 mg in conventional-milled samples and 18 mg in pure titanium. Meanwhile, corrosion resistance was significantly enhanced in climb-milled samples, with the corrosion rate decreasing to 0.0003 mm/year, compared to 0.02 mm/year in conventional-milled samples. These findings underline the potential of climb milling to enhance the mechanical and corrosion properties of titanium, making it more suitable for critical applications in military, petrochemical, and medical industries. By optimizing milling strategies, the lifespan and performance of titanium components in sensitive engineering and biomedical fields can be substantially improved.
کلیدواژه‌های انگلیسی مقاله Titanium,Machining,milling,Wear,Corrosion
نویسندگان مقاله A.M. Baravardeh |
Department of Mechanical Engineering, University of Gonabad, Gonabad, Iran

S.H. Pourhoseini |
Department of Mechanical Engineering, University of Gonabad, Gonabad, Iran

S.M. Sedehi |
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran

M. Baghban |
Department of Mechanical Engineering, University of Gonabad, Gonabad, Iran

نشانی اینترنتی https://ijmf.shirazu.ac.ir/article_7951_cf99ed37e0b1606df4b792e2506c07c3.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات