این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۸، شماره ۶، صفحات ۱۴۵۹-۱۴۶۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Size Distribution and Mean Diameter of Microbubbles in Different Types of Ejector Bubble Generators
چکیده انگلیسی مقاله
This study investigates the influence of air discharge on bubble size distribution across various types of bubble generators. Air discharge rates were adjusted between 0.1 lpm and 1.0 lpm for ejector, ejector-barrier plate, and venturi bubble generators, under a controlled experimental setup. High-speed camera footage captured bubble images, which were then analyzed to determine size distributions. A predictive correlation for bubble size distribution was formulated using the Buckingham Pi theorem. Results revealed that increased air discharge correlated with larger bubble diameters, with average increases of 8.01%, 10.71%, and 9.25% for ejector, ejector-barrier plate, and venturi generators, respectively. Notably, the ejector-barrier plate generator exhibited the greatest capability for producing smaller bubbles, with a peak increase in the probability density function of 13.95% for the ejector type, 18.05% for the ejector-barrier plate type, and 9.49% for the venturi type. Experimental findings aligned well with the proposed predictive model for average diameter and bubble size distribution.
کلیدواژههای انگلیسی مقاله
Barrier plate,Air discharge,Image analysis,Log-normal distribution,Buckingham Phi theorem
نویسندگان مقاله
I. Catrawedarma |
Department of Mechanical Engineering, Politeknik Negeri Banyuwangi, Jalan Raya Jember Km. 13, Kabat, Banyuwangi 68461, Indonesia
S. Ton |
Department of Agribusiness, Politeknik Negeri Banyuwangi, Jalan Raya Jember Km. 13, Kabat, Banyuwangi 68461, Indonesia
D. Dwi Pranowo |
Department of Civil Engineering, Politeknik Negeri Banyuwangi, Jalan Raya Jember Km. 13, Kabat, Banyuwangi 68461, Indonesia
F. Surahmanto |
Department of Mechanical Engineering Education, Universitas Negeri Yogyakarta, Yogyakarta 55281, Indonesia
نشانی اینترنتی
https://www.jafmonline.net/article_2644_ac9a212b03909c49641a513e6ccbef0b.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات