این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۶، صفحات ۱۶۵۲-۱۶۶۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Study and Evaluation of the Effects of Bionic Groove Structures Applied to Wheel Spokes on the Aerodynamics of a Car Model
چکیده انگلیسی مقاله Decreasing the wheel aerodynamic drag is one of the important measures for lowering vehicle drag and improving fuel efficiency. The innovation of this study is designing the bionic non-smooth groove structure on the spoke surface as a drag reduction method and introducing the energy gradient function K value to characterize the aerodynamic drag. Wheels with and without grooved spoke structures were mounted on the Ahmed body, and the flow characteristics around the wheel region and car model were numerically investigated. A comparison between the numerical and experimental pressure distribution results was used to verify the accuracy of the numerical method. The numerical results demonstrated that the spoke designed with groove structures could reduce the aerodynamic drag of the car model and the wheels. Among the three groove structures studied, Case 1 (the forward groove structure) exhibited the greatest impact on drag decrease, with a reduction in the vehicle drag coefficient by 2.85%, the front wheels drag coefficient by 8.37%, and the rear wheels drag coefficient by 7.93%. The Q criterion was used to analyze the vortex flow around the wheels, and this analysis revealed that the designed groove structures reduced vortex generation, resulting in delayed flow separation and weakened energy dissipation, which decreased aerodynamic drag. Finally, the calculated K values suggested that the designed groove structures improved flow stability around the wheels, and the vehicle drag coefficient was positively correlated with K in the unstable-flow regions of the front and rear wheels. 
کلیدواژه‌های انگلیسی مقاله Aerodynamic Drag,Non-smooth structures,Large-eddy simulation,Ahmed model,Energy gradient theory
نویسندگان مقاله T. H. Huang |
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China

H. C. Zhou |
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China

J. Yang |
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China

W. Zhang |
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013, China

Q. Y. Chen |
China Automotive Engineering Research Institute Co. Ltd, Chongqing 401122, China

نشانی اینترنتی https://www.jafmonline.net/article_2657_b112ba9583cd91636fb75aab48a413a2.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات