این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
یکشنبه 23 آذر 1404
Iranian Journal of Chemistry and Chemical Engineering
، جلد ۴۴، شماره ۴، صفحات ۱۲۵۰-۱۲۶۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Three-Dimensional Analysis of Pressure Swirl Injector Based on Trumpet Effects and Orifice Length Variations
چکیده انگلیسی مقاله
This research studies the pressure swirl injector’s internal and external flow under adiabatic and incompressible assumptions. A transient three-dimensional flow simulation has been employed. To mitigate computational costs, a periodic simulation approach, wherein only one-quarter of the injector geometry is solved, has been adopted. The Navier-Stokes equations have been solved using the CLSVOF method. This study aims to identify the effects of trumpet angle and orifice length on the flow parameters of the pressure swirl injector. At first, an injector with a trumpet angle is compared with a base injector (BI) with no trumpet angle. The results show that the trumpet angle affects flow by reducing film thickness and spray angle while increasing the velocity magnitude and the axial velocity component. However, the discharge coefficient remains relatively constant compared to the BI. In the second case, and as a novelty of the research, orifice length variations in the trumpet injector (TI) have been studied. The findings indicate that an increase in orifice length from 5 mm to 45 mm leads to an increase in liquid film thickness of about 6.5% and SMD 30%, while the spray angle, velocity magnitude, and axial velocity component decreased by 16%, 23%, and 16%, respectively.
کلیدواژههای انگلیسی مقاله
Pressure swirl atomizer,Spray Characteristics,CLSVOF,3D simulation,Simplex atomizer
نویسندگان مقاله
Adel Makhdoum |
Faculty of New Technologies and Aerospace Engineering, Shahid Beheshti University, Tehran, I.R. IRAN
Seyed Mahdi Mirsajedi |
Faculty of New Technologies and Aerospace Engineering, Shahid Beheshti University, Tehran, I.R. IRAN
نشانی اینترنتی
https://ijcce.ac.ir/article_720584_e6920e5a1b2678ab21696c7fdfc764e9.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات