این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 29 آذر 1404
Iranian Journal of Materials Forming
، جلد ۱۲، شماره ۱، صفحات ۴-۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Study on the Effect of Fabrication Method on the Polarization of Solid Oxide Fuel Cells
چکیده انگلیسی مقاله
A promising strategy for reducing concentration polarization in solid oxide fuel cells (SOFCs) is the creation of an anode layer with aligned, channel-like pores to facilitate efficient gas transport with minimal resistance. Freeze casting is an advanced shaping technique capable of forming such a unique microstructure. In this study, three NiO-YSZ|YSZ|LSM-YSZ SOFCs were fabricated using three different methods, and their electrochemical performances were compared. The first cell featured an anode prepared via freeze casting, while the other two utilized conventional dry pressing— one with a pore former and one without. All anodes were composed of NiO-50 wt.% YSZ composite powder, with YSZ electrolyte and LSM-YSZ cathode layers subsequently applied. The microstructures were analyzed using scanning electron microscopy (SEM), and electrochemical impedance spectroscopy was conducted within the 650–800 °C temperature range. The concentration polarization resistance of the freeze-cast anode-supported SOFC was 0.09 and 0.07 Ω.cm² at 750 and 800 °C, respectively. At 800 °C, concentration polarization resistance was accounted for 13% of total cell resistance in the freeze-cast anode SOFC, compared to 20% and 22% in the dry-pressed anodes with and without a pore former, respectively.
کلیدواژههای انگلیسی مقاله
Electrochemical impedance spectroscopy,Freeze-casting,Polarization Resistance,SOFC
نویسندگان مقاله
A. Karimi |
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
M.H. Paydar |
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
نشانی اینترنتی
https://ijmf.shirazu.ac.ir/article_8017_df6fb936fce1a1a159490e41ffbf1d35.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات